Ghost Immobiliser Fitter
Ghost immobilisers are one of the most effective ways to protect your vehicle from thieves. They prevent vehicles from getting started without the correct code entered. They can also be used to track vehicles remotely. They are becoming more popular and many insurance companies offer discounts to drivers who have these systems.
It is tamper proof
The Ghost Immobiliser, a high-tech security device, prevents your car from starting without a unique PIN or beacon. The system can be customized to fit your vehicle and is highly efficient as an anti-theft tool. After installation, it is essential to test the system to make sure that it is working correctly. Entering the PIN and launching the engine is a simple method to verify that the system has been installed correctly. Regular testing can identify any issues or issues with the system as early as possible.
The system communicates directly with the ECU and will not allow your car to start unless you select the proper sequence. This can be done by using the electronic buttons on your steering wheel or via an app on your smartphone. Its low profile and tamper-proof design make it difficult for thieves. It can also be used as beacons to determine the whereabouts of your vehicle. It is a great solution to protect valuable vehicles that have been modified or for those who wish to secure their expensive or rare cars.
This tamper proof device uses the buttons on your steering wheel to generate an exclusive sequence known only by you. The sequence is computationally unattainable for thieves to guess, and it can be easily changed with a secure reset code. It is easily installed by a technician the majority of vehicles.
After installing the device you will need connect it to an electrical source as well as an earthing point. Find the wiring diagram of your vehicle to identify the wires that are required. Be sure to insulate the connections with heat shrink tubing or insulation tape to prevent short circuits and electrical damage. You should also double-check the connections and mounting for any signs of tampering by thieves.
The Ghost 2 immobiliser cost can be set to Service/Valet mode for older vehicles that require the battery isolation to carry out maintenance or service. This will disable the device with an individual pin code, which will prevent it from being re-activated by thieves.
It is wireless
Unlike other anti-theft devices, ghost immobilisers operate in a quiet manner and cannot be detected by thieves. They can be put in many vehicles to protect them against key cloning and hacking attacks and signals relay attacks. They can also be used to remotely track a vehicle. They can send owners instant notifications when their vehicle is stolen. Some insurance companies offer discounts to customers who purchase them. It is the most effective method to stop car theft.
The Ghost II immobiliser offers a easy and affordable method to safeguard your vehicle from theft. The device is wireless and is compatible with all cars. It is weatherproof and tamperproof, making it an excellent choice for any type of vehicle. It also has a three-year warranty. The Ghost II is unlike other security products in that it doesn't require additional wiring or other components. Its unique pin code sequence protects your car from key cloning and theft by blocking the engine from starting until a specific disarm sequence is entered. The sequence can vary from one to 20 buttons, meaning that thieves will have to spend much more time trying to crack the code before they are able to drive away.
The Ghost II can also block signals coming from a key fob. It can determine the moment a key fob has been cloned, or hacked and disable the engine by triggering an alarm. It also stops the use of an electronic signal relay, which is often used by organized car-thief gangs to gain entry to vehicles.
It is crucial to test the Ghost Immobiliser system to ensure that it is functioning properly. This will help you spot any issues early and correct them before they become serious. It is recommended to test the system by entering the PIN code and then starting the engine as part of your regular vehicle checks.
It is crucial to put the immobiliser unit in a hidden area, so that it is difficult for thieves to access. If you can, place the unit behind your dash using cable tie. Make sure that all connections are properly insulated and can't be manipulated by thieves. Make sure that the location of the mounting is secure.
It can be used with a variety of vehicles
The ghost immobiliser is a highly effective security device that can assist in stopping car theft. It works by preventing your car from beginning until you enter the correct pin code. The code can be generated by pressing several buttons on the steering wheel, door panel, or centre console. The immobiliser can be programmed at any time by the owner. It is tamper-proof. what is a ghost immobiliser against hacking, key-cloning and other malicious activities.
It is suggested that you hire an expert to install the Ghost immobiliser. This is because the process of installation is complicated, and mistakes could render the device ineffective or even harm your vehicle. Additionally, DIY installation can void warranties for both the Ghost Immobiliser and your vehicle.
The best way to start is by obtaining the wiring diagram for your car model. This will provide you with a guide to locate the CAN H wires as well as CANL wires which are used for the immobiliser. Note these wires after you have identified them so that they do not be accidentally disconnected during installation. Also, make sure you select a secure and safe grounding location for the system.
It is a good idea to test the immobiliser after the wires have been connected to make sure that everything is working properly. Enter the PIN code and then start your engine to determine whether everything works. It is a good idea also to check the immobiliser on a regular basis to ensure it is functioning as it was is intended.
Another advantage of the ghost immobiliser is that it doesn't require any LED indicators or key fobs, and can be disarmed by pressing a distinct sequence of buttons on your steering wheel, door panel, or centre console. The immobiliser is also tamper-proof and does not leave any evidence of its installation, making it difficult for thieves to locate or disable. It can be used to increase the security of your vehicle in the event of an intrusion. Many insurance companies recommend it.
It is simple to install
The Ghost immobiliser is a highly advanced device that keeps your vehicle secure from the most skilled thieves. It stops your vehicle from starting until a distinct PIN or sequence is entered along with the key fob. This prevents hacking, cloning or even key theft, so thieves cannot steal your car. It also uses a number of other sensors to identify attempts at driving away and can notify the owner or the police in the event of tampering.
Installing a ghost-immobiliser can be tricky, especially for people without prior experience with alarms or other security systems. Utilizing the appropriate equipment and materials is essential to a successful installation. A multimeter is a great tool to check electrical values. Insulation cables and cable ties can also be useful in securing connections. The Ghost immobiliser user's manual contains specific guidelines that are specific to the model and wiring of your vehicle.
It is important to examine the locations of the wires for the CAN H and L before the installation process to ensure that they are accurate. They are crucial for powering the immobiliser. Any errors could lead to an ineffective system or even failure. Label the wires with labels or tape so that you are able to keep track of them. You should also identify an uninterrupted source of 12V and a grounding.
Once you've identified the proper location, you can begin putting the ghost immobiliser together. To avoid short circuits or accidental airbag deployment, you will need to disconnect the battery first. The next step is to connect the wires. Make sure you follow the instructions in the user manual to ensure a smooth and secure installation.
After you have completed the wiring, connect the Ghost immobiliser using CAN to the engine control unit. It will be a challenge for thieves, as the device is directly connected to the engine control unit, to remove or disable it. It's also tamper-proof and the only way to disable it is to enter an access code is to enter a personal code. The pin code will only be known by the vehicle owner and installer.
You can also utilize the Ghost immobiliser as a temporary solution to allow someone else to drive your car for a short period for instance, when you're out of town for work or need to get a service. This feature is called the Service/Valet Mode and it can be turned on using a key fob or mobile app.